EMC components (Noise suppression)
Ferrite cores / Nanocrystalline Alloys cores etc.
Split type
High μ FERRITE CLAMP KTFC
Split FERRITE CLAMP for noise suppression in the frequency rang from 3 to 50MHz
SLEEVE FERRITE CLAMP GRFC, RFC
Fair-Surface type with no protrusion of snap or hinge parts
SLEEVE FERRITE CLAMP RFC-A
Ferrite core mounted in highly heat-resistant case
SLEEVE FERRITE CLAMP RFCW
Ferrite core (Noise filter) which can endure in engine rooms
High μ FERRITE CLAMP KRFC
Split FERRITE CLAMP for noise suppression in the middle frequency range 3-50MHz
LOW CUT FERRITE CLAMP MRFC
Low frequency ferrite core mounted in UL94V-0 rated case
LOW CUT FERRITE CLAMP RFC-MA
Highly heat-resistant clamp, effective in suppressing conducted/radiated noise at low frequencies
TOROIDAL FERRITE CLAMP GTFC
Toroidal design makes cable easy to turn around the clamp
TOROIDAL FERRITE CLAMP GTFCK
Toroidal cores with easily mounting fixture on chassis
FLAT CORE GSSH
Split core type for easy assembly on wired cables and connector cables
OPEN CIRCUIT CORE GFPO
Open magnetic circuit structure provides high impedance through close contact with FPCs
BLOCK CORE BCN
Easy installation and fixing by combination with plastic clamp
Non-split type
TOROIDAL CORE KTR
Non-split toroidal core for noise reduction in the middle frequency range 3-50MHz
BROAD EFFECT CORE BRE
Highly effective ferrite core for EMI noise suppression over a broad frequency range
BROAD EFFECT CORE BREK
High-performance noise suppression core with secure screw fixation
BROAD EFFECT CORE BREK-55-75-25-SR
Amorphous alloy core with excellent magnetic saturation resistance
LOW CUT CORE (High μ type) TRMH
Optimal ferrite core for suppressing conducted noise at frequencies 1 MHz or less
LOW CUT CORE TRM
Mn ferrite cores, suitable suppressor for conducted and radiated noise in a low frequency range
TOROIDAL CORE GTRCA
TOROIDAL CORE mounted in casing suppresses noise in a high-frequency band
TOROIDALCORE TRCB
Toroidal cores with cases effectively suppress noise in a low frequency band
METAL CORE MPTR
Normal-mode noise suppressing core with excellent DC superimposition properties
On PCBs
GRIP CORE GRIP
Ferrite core is applicable to leaded components without the need for adhesive
SMD COMMON MODE FILTER KWCM
Reflow soldering applicable, wire-wound ferrite cores, common-mode noise filter for high-speed differential signals
SMD COMMON MODE FILTER KWCM-HS
Reflow soldering applicable, wire-wound ferrite cores, common-mode noise filter for high-speed differential signals
SMD COMMON MODE FILTER KWCM-HDMI
Reflow soldering applicable, wire-wound ferrite cores, optimal noise filter for HDMI signals
Sheet type
SMARTPLY™ FFPC
Thin ferrite sheet provides optimal noise solutions for FPC and Flat flexible cables (FFC)